Send Email
Phone
R&D
0102
PSI319 R＆D Peptide Synthesizer
Product Profile
PSI319 single-channel R&D fully automated peptide synthesizer, the reactor is equipped with three volumes of 50/100/200ml, which can be replaced according to the actual needs. Unlike the multi-channel PSI286/386 for R&D and screening purposes, the PSI319 is mainly applied to optimise an ultra-long peptide chain.
PSI319 single-channel R&D peptide synthesizer is a specialized laboratory instrument designed to support the synthesis of peptides specifically for research and development purposes. This type of synthesizer is optimized for flexibility, precision, and efficiency, making it ideal for creating a wide range of peptides, including those with complex sequences or modifications, often required in the early stages of scientific research and drug development.
Basic Parameters
|
Model |
Channels |
Reactor/ml |
Amino Acid Sites |
Solvent Sites |
Width×Depth×Height |
|
PSI-319-50ml |
1 |
25 / 50 |
8 or 16 |
7 |
60cm×60cm×72cm |
|
PSI-319-50ml |
1 |
50 / 100 / 200 |
8 or 16 |
7 |
60cm×60cm×72cm |
|
PSI-319-500ml |
1 |
200 / 500 |
8 or 16 |
7 |
60cm×60cm×72cm |
Specifications
The peptide synthesis instrument of American Peptide Technology Company adopts the mixing mode of "fixed reactor, stirring paddle pushing the solid-phase resin to collide with the reactants"; when the stirring paddle is activated, the resin is grinded and squeezed, and part of the resin is deformed and broken, which reduces the coupling rate; and the broken resin seeps into the gap of the sieve plate, which influences the speed of liquid discharging. In order to avoid resin damage, in 1995, JOHN YE successfully tested the mixing mode without stirring paddles, in which the solid-phase resin collides with the reactants by turning the reactor up and down, and the coupling efficiency increased to more than 99.5%.
●Scale: 0.1~6mmol
●Reactor: 25 / 50ml or 50 / 100 /200ml or 250 / 500ml
●Amino acid sites: 8 or 16
●Amino acid tank: 15~100ml
●Solvent sites:7
●Solvent tank: 2L, 5L, and 10L
●Solvent flow rate: 1~2ml/sec
●Thermostat: water, oil or other media
●Mixing systems: 180 degrees, “up and down” mixing
●Stirring speed: 0 to 30 rpm
●Machine material: 304 stainless steel
●Power: 110/220 Volts, 50/60 Hz
●Dimension: 60cm×60cm×72 cm
●Weight: 68kg
After-sales Service
Installation and commissioning: Provide professional technicians to install and commission the equipment to ensure that the equipment can operate correctly.
Training: Provide operation, maintenance, maintenance training to help customers fully understand and master the use of equipment.
Maintenance: Provide regular or on-demand equipment maintenance, maintenance services to ensure that equipment performance continues to be stable.
Fault repair: In the event of equipment failure, to provide rapid maintenance services.
Spare parts supply: Provide original or certified spare parts to ensure the quality and stability of replacement parts.
Remote Support: Remotely assist customers to solve operation problems or simple faults through telephone, network and other means.
On-site support: If the problem can not be solved remotely, send technicians to the site to provide support.
Customer Support Hotline: Set up a customer support hotline to answer customer questions and provide technical support at any time.
Satisfaction Survey: Conduct regular satisfaction surveys to collect customer feedback to improve the quality of after-sales service.