Send Email
Phone
Pilot
01
PSI419 Two-Channel Peptide Synthesizer
Product Profile
The PSI419 two-channel pilot-scale fully automated peptide synthesizer is capable of both pilot-scale development and pilot-scale production of 2 peptide chains at the same time. The two reactors do not interfere with each other and can be set up with their own feeds and synthesis methods. The synthesis scale of single channel is 2.5-20mmol; 10 amino acid storage tanks are convenient for users to customize all kinds of amino acids, coupling agents and side chain groups.
PSI419 two-channel peptide synthesizer is an essential tool for laboratories involved in peptide research and development, offering the ability to produce multiple peptides simultaneously with precision and efficiency. This makes it an excellent choice for researchers who need to streamline their peptide synthesis processes while maintaining flexibility in their experimental designs.
Basic Parameters
|
Model |
Channels |
Reactor L |
Amino Acid Sites |
Solvent Sites |
Width×Depth×Height |
|
PSI-419-2L |
2 |
0.5/1/2 |
10 |
5 |
108cm×62cm×90.5cm |
Specifications
After the peptide chain is developed and screened in the pilot stage, the second step of the pilot test is to amplify according to the test results; the third step of the pilot test is to continue to amplify according to the results of the pilot test, and after the success of the pilot test, the target peptide chain can be mass-produced basically.PSI419 2-channel pilot-type fully automated peptide synthesizer is a fully automated pilot peptide synthesizer that can satisfy the needs of asynchronous synthesis.
The peptide synthesizers of American Peptide Technology Company all adopt the mixing mode of "fixed reactor, stirring paddle pushing the solid-phase resin to collide with the reactants"; when the stirring paddle is activated, the resin is ground and squeezed, and part of the resin is deformed and broken, which reduces the coupling rate; the broken resin seeps into the gap of the sieve plate, which influences the speed of liquid discharging. In order to avoid resin damage, in 1995, JOHN YE successfully tested the mixing mode without stirring paddles, in which the solid-phase resin collides with the reactants by turning the reactor up and down, and the coupling efficiency increased to more than 99.5%.
1.Number of channels：Simultaneous synthesis of 1~2 peptides
2.Synchronous：Different synthetic methods can be used to synthesize different peptides
3.Material of the machine：304stainless steels
4.Reactor Specifications：0.5L、1L、2L，Jacketed Reactor
5.Single-channel synthesis scale：2.5-20mmol
6.Amino acid storage tanks：10
7.Solvent storage tanks：8
8.Nitrogen protects：The entire synthesis process is protected by the inert gases N2 or Ar.
9.Stirring mode：Mixing mode without paddles
10.Stirring speed：0 to 25 rpm,Self-adjusting
11.Solvent flow rate：200 ml/min
12.Stirring power：Electronic servo motors
13.Temperature control method：Water bath
14.Power supply：110/220V，50/60Hz，1KW
15.Synthesis length：Peptide sequences of more than 100 amino acids can be easily synthesized
After-sales Service
Installation and commissioning: Provide professional technicians to install and commission the equipment to ensure that the equipment can operate correctly.
Training: Provide operation, maintenance, maintenance training to help customers fully understand and master the use of equipment.
Maintenance: Provide regular or on-demand equipment maintenance, maintenance services to ensure that equipment performance continues to be stable.
Fault repair: In the event of equipment failure, to provide rapid maintenance services.
Spare parts supply: Provide original or certified spare parts to ensure the quality and stability of replacement parts.
Remote Support: Remotely assist customers to solve operation problems or simple faults through telephone, network and other means.
On-site support: If the problem can not be solved remotely, send technicians to the site to provide support.
Customer Support Hotline: Set up a customer support hotline to answer customer questions and provide technical support at any time.
Satisfaction Survey: Conduct regular satisfaction surveys to collect customer feedback to improve the quality of after-sales service.