Leave Your Message
PSI586 Production Peptide Synthesizer

Mini Production

PSI586 Production Peptide Synthesizer

The PSI586 production model fully automated peptide synthesizer production model is green with solvent recirculation system (SRS). The dual solvent recirculation system reduces washing solvent consumption by 40%, and also reduces waste liquid discharge and disposal by 40%. 

    Product Profile

    The PSI586 production model fully automated peptide synthesizer production model is green with solvent recirculation system (SRS). The dual solvent recirculation system reduces washing solvent consumption by 40%, and also reduces waste liquid discharge and disposal by 40%. The mixing mode adopts 180 degree up-and-down turning of the reactor to drive the solid-phase resin and the reactants to collide violently", and the larger the volume and weight of the reactor, the higher the mixing intensity.

    PSI586 Production Peptide Synthesizer is a specialized instrument designed for producing peptides at a slightly larger scale than typical research-grade synthesizers, yet not as large as full-scale industrial production. This type of synthesizer is ideal for laboratories and biotech companies that require intermediate production volumes, such as for pilot studies, preclinical testing, or custom peptide orders.

    Basic Parameters

    Model

     Channels

    Reactor L 

    Amino Acid Sites

    Solvent Sites

    Width×Depth×Height

    PSI-586-10L

    1

    2 / 10

    4

    or 7

    92cm×85cm×165cm

    PSI-586-30L

    1

    5 / 10 / 20 / 30

    4

    or 7

    92cm×85cm×165cm

    Specifications

    The PSI586 Production Peptide Synthesizer can meet your needs for medium-sized, mass-produced peptides.
    The peptide synthesizer of American Peptide Technology Company adopts the mixing mode of "fixed reactor, stirring paddle to push the solid-phase resin to collide with the reactants"; when the stirring paddle is activated, the resin is ground and squeezed, and part of the resin is deformed and broken, which reduces the coupling rate; and the broken resin seeps into the gap of the sieve plate, which influences the speed of liquid discharging. In order to avoid resin damage, in 1995, JOHN YE successfully tested the mixing mode without stirring paddles, in which the solid-phase resin collides with the reactants by turning the reactor up and down, and the coupling efficiency increased to more than 99.5%.

    ●Scale: 12.5~180mmol
    ●Amino acid sites:
    ●Amino acid tank: 1L or 2L
    ●Solvent sites:5 or 7
    ●Solvent tank: 50L,100L, and 200L
    ●Solvent flow rate:0.5~2.5L/min
    ●Thermostat: water, oil or other media  
    ●Mixing systems: 180 degrees, “up and down” mixing 
    ●Stirring speed: 0 to 15 rpm
    ●Machine material: 304 stainless steel
    ●Power:110/220 Volts.50/60 Hz
    ●Dimension:92cm× 85cm×165cm
    ●Weight: 330kg

    After-sales Service

    Installation and commissioning: Provide professional technicians to install and commission the equipment to ensure that the equipment can operate correctly.
    Training: Provide operation, maintenance, maintenance training to help customers fully understand and master the use of equipment.
    Maintenance: Provide regular or on-demand equipment maintenance, maintenance services to ensure that equipment performance continues to be stable.
    Fault repair: In the event of equipment failure, to provide rapid maintenance services.
    Spare parts supply: Provide original or certified spare parts to ensure the quality and stability of replacement parts.
    Remote Support: Remotely assist customers to solve operation problems or simple faults through telephone, network and other means.
    On-site support: If the problem can not be solved remotely, send technicians to the site to provide support.
    Customer Support Hotline: Set up a customer support hotline to answer customer questions and provide technical support at any time.
    Satisfaction Survey: Conduct regular satisfaction surveys to collect customer feedback to improve the quality of after-sales service.